| Items |
 /Asset/Mi-8.jpg Mi-8 Self-Contained Standard Precipitators - 800 CFM |
 /Asset/Mi-10.jpg Mi-10 Self-Contained Standard Precipitators - 1000 CFM |
 /Asset/Mi-12.jpg Mi-12 Self-Contained Standard Precipitators - 1200 CFM |
 /Asset/Mi-16.jpg Mi-16 Self-Contained Standard Precipitators - 1600 CFM |
 /Asset/Mi-20.jpg Mi-20 Self-Contained Standard Precipitators - 2000 CFM |
|||||
| Description |
Self-Contained Standard Precipitators - Model Series: Mi (with Integral Blower/Motor Assembly)- 800 Though 6000 CFM Mi-series: This product range is self-contained, utilizing its own built in squirrel cage blower and motor assembly. Typically the units are free standing or suspended from the ceiling. Source capture applications use a pickup hose assembly to draw mist or smoke directly from it source and into the precipitator for cleaning much like a vacuum cleaner. |
|||||||||
| Nominal Rating1 | 22.7 m³/min800 ft³/min | 28.3 m³/min1000 ft³/min | 34 m³/min1200 ft³/min | 45.3 m³/min1600 ft³/min | 56.6 m³/min2000 ft³/min | |||||
| Cabinet Material | 16 gauge, Cold Rolled Steel (Std.) Primed with Enamel Finish | |||||||||
| Cell(s) Material | Aluminum (Std.) Hastelloy Stainless Steel | |||||||||
| Unit Weight | 200 lb | 225 lb | 240 lb | 300 lb | 400 lb | |||||
| Height | 23 in | |||||||||
| Length | 41.5 in | |||||||||
| Width | 19 in | 23 in | 26.563 in | 36 in | 44.375 in | |||||
| Inlet Duct Height | 15.5 in | |||||||||
| Inlet Duct Width | 16.25 in | 20.375 in | 23.75 in | 33.375 in | 41 in | |||||
| Outlet Duct Height | 10 in | |||||||||
| Outlet Duct Width | 12 in | 12 in | 12 in | 29 in | 29 in | |||||
| Motor Type | Open Drip Proof (ODP) (Standard) Totally Enclosed, Fan-Cooled (TEFC) | |||||||||
| Motor Power | 1/4 hp | 1/4 hp | 1/3 hp | 1/3 hp | 1/2 hp | |||||
| Motor Speed | 1725 rpm | |||||||||
| Voltage | 115 V220 V | |||||||||
| Frequency | 50 Hz60 Hz | |||||||||
| Phase | 1 | |||||||||
| Electrical Design | 50 Hz or NEMA 3, 4, 4X or 12 NEMA 1, 60 Hz (Std) | |||||||||
| Motor Drive Design | Flexible V-Belt Variable Sheave | |||||||||
| Blower Type | Forward cure with sealed ball bearings mounted with rubber grommets to reduce noise and vibration; belt driven. | |||||||||
| Blower Power | 650 rpm | 675 rpm | 700 rpm | 750 rpm | 800 rpm | |||||
| Air Cleaner Type | Two stage, dry, electrostatic precipitator | |||||||||
| Efficiency | Atmospheric dust spot 91%; Cold DOP 96% | |||||||||
| Efficiency Test Method | ASHRAE 52-76 | |||||||||
| Quantity at Cell Size - Each | 1 x 800 ft³/min | 1 x 1000 ft³/min | 1 x 1200 ft³/min | 2 x 800 ft³/min | 2 x 1000 ft³/min | |||||
| Total Collector Plate Surface | 7612 in² | 9688 in² | 11418 in² | 15224 in² | 19376 in² | |||||
| Plate Spacing | 0.323 in | |||||||||
| Air Velocity | 415 ft/min | |||||||||
| Collecting Cell Height | 18 in | |||||||||
| Collecting Cell Width | 17.125 in | 21.25 in | 24 in | 17.125 in | 21.25 in | |||||
| Collecting Cell Depth | 12.5625 in | 12.5625 in | 12.563 in | 12.563 in | 12.5625 in | |||||
| Collecting Cell Weight | 26 lb | 32 lb | 37 lb | 26 lb | 32 lb | |||||
| Unit Operating Current Range | 0.4 to 0.8 mA | 0.4 to 0.9 mA | 0.4 to 0.9 mA | 0.9 to 1.3 mA | 1.1 to 1.7 mA | |||||
| Ionizer Direct Current (DC) Voltage | 7200 to 8800 V | |||||||||
| Collector Direct Current (DC) Voltage | 7200 to 8800 V | |||||||||
| Ionizer Voltage Gradient (DC) at 8000 Volt (V) Direct Current (DC) Voltage | 11158 V/in | |||||||||
| Collector Voltage Gradient (DC) at 8000 Volt (V) Direct Current (DC) Voltage | 24768 V/in | |||||||||
| Collector Plates Insulator and Diameter | Collector plates are suspended with four, 2.25" diameter ceramic insulators. | |||||||||
| Ionizer Type | Integral to collecting cell, supported without ceramic insulators, tungsten wire electrodes (standard), optional electrode materials available. | |||||||||
| Ionizer Electrode Diameter | 0.007 in | |||||||||
| Ionizer Suspension | Stainless steel wire springs at each electrode end. | |||||||||
| Power Pack Description |
Solid state design, controls include: circuit breaker with manual reset, LED Power on light, ammeter, variable rheostat, safety interlock switch. Power packs can be unit or remote mounted. |
|||||||||
| Power Package Quantity | 1 | |||||||||
| Pre & Post Filter | Washable, aluminum mesh mechanical pre-and post cell filters. | |||||||||
| Portable Designs | Contact factory for information on the Mi-10P series portable air cleaners. | |||||||||
| Water Wash Manifolds | Copper manifold (pipe) with wide angle spray nozzles; single side wash. | |||||||||
| System Cleaning | Fully Automatic Wash and Dry Cycle with or without detergent injection. Manually Initiated | |||||||||
| Source Capture Plenums | Specifically designed for the application | |||||||||
| Filter Manifolds | Pre and post filter racks designed per requirement for HEPA or charcoal. | |||||||||
| Electrical Controls | Custom designed options in relay logic or PLC | |||||||||
| Additional Information | Mi-series units are built only with industrial cells as described above under the I-series. Blower and motor assemblies are designed to accommodate the SCFM throughput of the application with consideration for internal and external static pressure losses. Mi-series housings are made of cold rolled steel that is primed and finished in enamel. Single tier and two tier configurations are available in sizes ranging from 800-CFM to 6000-CFM. | |||||||||
| Note |
Technical data and design features are subject to change without prior notification Consult factory for larger models. |
|||||||||
| Manufacturer | Universal Air & Gas | |||||||||
|
||||||||||
