Universal Air & Gas Products Corporation (UAPC) has decades of successful experience in turn-key, natural gas fuel system design and construction. Gas compression, storage, dispensing, regulation and controls are all available from UAPC. Similar expertise is applied to government, military and industry applications. These applications include natural gas (NGV) systems built to virtually any USA or international standard.

The services that we provide for the production of natural gas refueling stations or component systems are:

• Consulting
• Station design/engineering services
• In house CAD design capabilities
• Standard and custom designed compression packages
• Supply of state of the art fuel dispensing systems
• Supply of ASME & DOT gas storage systems
• Supply of card readers
• Construction management

Certified field service technicians and engineers support UAPC systems during installation and startup. As needed or long-term maintenance agreements are also available, which provide for routine or comprehensive technical site supervision. Documentation packages are extensive. This facilitates detailed maintenance, appropriate

Universal Air & Gas Products Corporation (UAPC) provides a comprehensive line of standard medical, pharmaceutical or industrial compressed air, vacuum & blower system products. Standard built per NFPA-99 or custom-built designs are available. These Industries demands a high level of reliability in the equipment they use & UAPC has the knowledge & equipment to meet these requirements.

We have years of experience in the design & manufacture of medical air, vacuum & blower systems; and can accommodate a wide range of custom design solutions to meet any & all applications required. Our standard line of reliable mechanical vacuum pumps produce vacuum as low as 29.9"Hg (0.5Torr) & our combination of positive displacement blower / vacuum pump systems as low as 0.2 microns. Compressor systems vary in pressure from 5 psig to 6000 psig. Customized options & systems are available.

Contact UAPC's application engineers to assist you in determining the best system design for your application. Please email, fax or call in your application for discussion and recommendation or use our on-line inquiry form.

Since 1962, Universal Air & Gas Products Corporation (aka Universal Air Precipitator or UAPC) has manufactured a wide range of gas compressors to match virtually every compressor application. Our compressor products range in discharge pressure from vacuum to 6000 psig and accommodate air, inert gases, fuel gases and many process gases. Both ambient intake and booster compressors are available in both lubricated and non-lubricated, rotary and reciprocating designs. Electric, diesel, gas and hydraulic drives are applied as required with simple or comprehensive control features.

A Complete line of Compressors, Boosters and Air Systems, Aftercoolers, Dryers, Filters, ASME Tanks, Vacuum Pumps, Blowers, Lubricant, Parts & Repairs, High Pressure, Low Pressure, 0 to 1500 CFM, Compact, with Wheels, without Wheels, we can provide them for you.

Gas Compressors/Boosters
Oil-Free and Lubricated
1-500hp Rotary; 1-150hp Reciprocating
5 to 2600 scfm, up to 35000 psig.
Electric, Engine or Hydraulic Drive
All NEMA Classifications 1-12.
Air and water cooled designs

Products and Services include:
Lubricated and Oil Free Recipes for Air and Gas
Compressor/Boosters, 1 or 2 stage, vertical or horizontal
Bare blocks or turnkey custom packages
Dry and Oil Flooded Rotary Screw Units
Base/tank mounted, open or cabinet enclosed
Diesel-driven construction portable & utility
Standard packages or turnkey custom designs

Universal Air & Gas Products Corporation (UAPC) provides a comprehensive line of standard breathing air compressor system products or custom-built designs. The two principle classifications of breathing air products are Low Pressure and High Pressure Breathing Air Compressors.

UAPCs application engineers can assist you in determining the best system design for your application. Please email, fax or call in your application for discussion and recommendation. We can accommodate outdoor, low ambient, off-shore, marine or hazardous location design requirements when required.

Low Pressure Breathing Air Compressors

Low Pressure Breathing Air SystemsLow pressure systems provide OSHA, CGA and NFPA recognized, Grade-D or better quality breathing air at a pressure ranging from 60 to 200 PSIG. (PSIG means pounds per square inch measured on gauge, where the gauge reads zero at normal atmospheric pressure.) Fixed manifold systems and flexible hoses are used to carry the cleaned and purified compressed air to the breather(s).

Each breather must wear a Type-C breathing apparatus, which regulates the flow of compressed air through a mask, hood or suit. The amount of airflow per person, measured in SCFM (Standard Cubic Feet Per Minute) varies with the style and manufacturer of the Type-C delivery apparatus. Low pressure breathing air systems are typically employed in situations where the breather will require a continuous supply of air on a constant basis. The breather must be able to accommodate the limitations to movement that result from the compressed air feed line he is attached to.

Industrial applications for breathing air typically use low pressure supply for contaminated work station environments. Medical applications supply low pressure breathing air to patients. Low pressure breathing air is much less expensive to use and maintain, when compared with high pressure alternatives, per SCFM delivered

High Pressure Breathing Air Compressors

High Pressure Breathing Air SystemsHigh pressure breathing air compressors are used primarily for recharging storage banks of compressed breathing air. These storage banks are either ASME or DOT cylinders typically designed to hold 5,000 to 6,000 psig. From these storage vessels, various sizes and styles of SCBA or SCUBA tanks are recharged with Grade-E breathing air.

The high pressure storage of the compressed air allow the breather to have completely free mobility with only the burden of the high pressure storage tank on his back. These tanks have a limited time frame of usage between refills, typically less than 45 minutes.

A complete breathing air system will include the high pressure compressor system with associated controls and filtration devices, followed by a large capacity storage system and finally a containment fill station. The containment fill station is a system designed to safely hold and fill from storage cylinders the SCBA or SCUBA tank(s) to maximum pressure. A containment fill station is designed to safely contain an accidental explosion of an SCBA or SCUBA tank, should it rupture during refill.

In addition to the commonly available 125 psig, diesel driven compressor, UAPC maintains a large fleet of high pressure rental compressors. By high pressure, we mean discharge pressure ranging from 200 psig to 6,000 psig. Applications for these compressors are PET, valve testing, seal testing, pipeline testing, and breathing air for filling SCBA or DOT pressure vessels. Water cooled high pressure compressors are supplied to customers with larger or continuous duty applications. Air cooled high pressure compressors are supplied to customers with intermittent or small capacity applications. Please contact us for further discussion of your rental compressor system application.