Residential Deluxe Precipitators - Model Series: D4 (In-Duct, Integral Spray Wash) - 2 1/2 Ton through 3 Ton Units

D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.

Residential Deluxe Precipitators - Model Series: D4 (In-Duct, Integral Spray Wash) - 4 Ton through 5 Ton Units

D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.

Residential Slimline Precipitators - Model Series: S4 (In-Duct) 2 1/2 Ton through 4 Ton Units

D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel.

Commercial Standard Precipitators - Model Series: C3 (In-Duct, Integral Spray Wash) - 3 Ton Through 8 Ton Units

C-series: Commercial and industrial, in-duct designs use identical housing or cabinet structures made of galvanized steel to support the cells installed within them. The galvanized cabinet structure can be factory finished on its exterior in enamel at the customer's option. Seal welding of the cabinet is also available at its option. In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Commercial Standard Precipitators - Model Series: C3 (In-Duct, Integral Spray Wash) - 10 Ton Through 22 1/2 Ton Units

C-series: Commercial and industrial, in-duct designs use identical housing or cabinet structures made of galvanized steel to support the cells installed within them. The galvanized cabinet structure can be factory finished on its exterior in enamel at the customer's option. Seal welding of the cabinet is also available at its option. In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Commercial Standard Precipitators - Model Series: C3 (In-Duct, Integral Spray Wash) - 9 Ton Through 27 Ton Units

C-series: Commercial and industrial, in-duct designs use identical housing or cabinet structures made of galvanized steel to support the cells installed within them. The galvanized cabinet structure can be factory finished on its exterior in enamel at the customer's option. Seal welding of the cabinet is also available at its option. In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Commercial Standard Precipitators - Model Series: C3 (In-Duct, Integral Spray Wash) - 24 Ton Through 40 Ton Units

C-series: Commercial and industrial, in-duct designs use identical housing or cabinet structures made of galvanized steel to support the cells installed within them. The galvanized cabinet structure can be factory finished on its exterior in enamel at the customer's option. Seal welding of the cabinet is also available at its option. In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Industrial Standard Precipitators - Model Series: i3 (In-Duct, Spray Wash) - 3 Ton through 8 Ton Units

I-series: Like the Commercial (C-series), the industrial, in-duct designs use housing or cabinet structures to support the cells installed within them. The galvanized cabinet structure can be factory finished on it exterior in enamel at the customers option. Seal welding of the cabinet is also available at option and required for UL710 ductwork installations. Again, In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Industrial Standard Precipitators - Model Series: i3 (In-Duct, Spray Wash) - 10 Ton through 22 1/2 Ton Units

I-series: Like the Commercial (C-series), the industrial, in-duct designs use housing or cabinet structures to support the cells installed within them. The galvanized cabinet structure can be factory finished on it exterior in enamel at the customers option. Seal welding of the cabinet is also available at option and required for UL710 ductwork installations. Again, In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Industrial Standard Precipitators - Model Series: i3 (In-Duct, Integral Spray Wash) - 9 Ton through 27 Ton Units

I-series: Like the Commercial (C-series), the industrial, in-duct designs use housing or cabinet structures to support the cells installed within them. The galvanized cabinet structure can be factory finished on it exterior in enamel at the customers option. Seal welding of the cabinet is also available at option and required for UL710 ductwork installations. Again, In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Industrial Standard Precipitators - Model Series: i3 (In-Duct, Integral Spray Wash) - 24 Ton through 40 Ton Units

I-series: Like the Commercial (C-series), the industrial, in-duct designs use housing or cabinet structures to support the cells installed within them. The galvanized cabinet structure can be factory finished on it exterior in enamel at the customers option. Seal welding of the cabinet is also available at option and required for UL710 ductwork installations. Again, In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Self-Contained Standard Precipitators - Model Series: Mi (with Integral Blower/Motor Assembly)- 800 Though 6000 CFM

Mi-series: This product range is self-contained, utilizing its own built in squirrel cage blower and motor assembly. Typically the units are free standing or suspended from the ceiling. Source capture applications use a pickup hose assembly to draw mist or smoke directly from it source and into the precipitator for cleaning much like a vacuum cleaner.

UAPC manufactures a range of fully customizable mobile air trailers for fire and emergency service organizations. All of our equipment is First Response Emergency Certified and provide features that include a quiet room and easy portability of the trailer. Our engineers can assist you with the design to match your specific needs.

Our unique quiet room design separates the engine compartment from the bottle filling station. This provides a safe, comfortable environment for the user. Power Tongue Jack, Ramp Door, Awning & Removable Lights are available options.

Universal Air & Gas Products Corporation (UAPC) has decades of successful experience in turn-key, alternate fuels system design and construction. Gas compression, storage, dispensing, regulation and controls are all available from UAPC. Similar expertise is applied to government, military and industry applications. These applications include process, inert and synthetic gas systems; breathing, medical and sterile air applications built to virtually any USA or international standard.

Some of the services that are provided for the production of digester, landfill, biogas, hydrogen and syngas systems are:

• Consulting
• System design/engineering services
• In house CAD design capabilities
• Standard and custom designed compression skid packages
• Gas treatment systems
• Construction management

Certified field service technicians and engineers support UAPC systems during installation and startup. As needed or long-term maintenance agreements are also available, which provide for routine or comprehensive technical site supervision. Documentation packages are extensive. This facilitates detailed maintenance, appropriate parts inventory, modification or upgrade provisions for the life of the installation.

Universal Air & Gas Products Corporation (UAPC) has decades of successful experience in turn-key, natural gas fuel system design and construction. Gas compression, storage, dispensing, regulation and controls are all available from UAPC. Similar expertise is applied to government, military and industry applications. These applications include natural gas (NGV) systems built to virtually any USA or international standard.

The services that we provide for the production of natural gas refueling stations or component systems are:

• Consulting
• Station design/engineering services
• In house CAD design capabilities
• Standard and custom designed compression packages
• Supply of state of the art fuel dispensing systems
• Supply of ASME & DOT gas storage systems
• Supply of card readers
• Construction management

Certified field service technicians and engineers support UAPC systems during installation and startup. As needed or long-term maintenance agreements are also available, which provide for routine or comprehensive technical site supervision. Documentation packages are extensive. This facilitates detailed maintenance, appropriate

Universal Air & Gas Products Corporation (UAPC) provides a comprehensive line of standard medical, pharmaceutical or industrial compressed air, vacuum & blower system products. Standard built per NFPA-99 or custom-built designs are available. These Industries demands a high level of reliability in the equipment they use & UAPC has the knowledge & equipment to meet these requirements.

We have years of experience in the design & manufacture of medical air, vacuum & blower systems; and can accommodate a wide range of custom design solutions to meet any & all applications required. Our standard line of reliable mechanical vacuum pumps produce vacuum as low as 29.9"Hg (0.5Torr) & our combination of positive displacement blower / vacuum pump systems as low as 0.2 microns. Compressor systems vary in pressure from 5 psig to 6000 psig. Customized options & systems are available.

Contact UAPC's application engineers to assist you in determining the best system design for your application. Please email, fax or call in your application for discussion and recommendation or use our on-line inquiry form.

Since 1962, Universal Air & Gas Products Corporation (aka Universal Air Precipitator or UAPC) has manufactured a wide range of air compressors to match virtually every compressor application. Our compressor products range in discharge pressure from vacuum to 6000 psig and accommodate air, inert gases, fuel gases and many process gases. Both ambient intake and booster compressors are available in both lubricated and non-lubricated, rotary and reciprocating designs. Electric, diesel, gas and hydraulic drives are applied as required with simple or comprehensive control features. Breathing air compressors for SCBA / SCUBA fill or low-pressure, OSHA type C, Grade-D; hazardous location designs; and turnkey products are primary markets for UAPC.

A Complete line of Compressors, Boosters and Air Systems, Aftercoolers, Dryers, Filters, ASME Tanks, Vacuum Pumps, Blowers, Lubricant, Parts & Repairs, High Pressure, Low Pressure, 0 to 1500 CFM, Compact, with Wheels, without Wheels, we can provide them for you.

Air Compressors/Boosters

Oil-Free and Lubricated
1-500hp Rotary; 1-150hp Reciprocating
5 to 2600 scfm, up to 35000 psig.
Electric, Engine or Hydraulic Drive
All NEMA Classifications 1-12.
Air and water cooled designs

Products and Services include:
Lubricated and Oil Free Recipes for Air and Gas
Compressor/Boosters, 1 or 2 stage, vertical or horizontal
Bare blocks or turnkey custom packages
Dry and Oil Flooded Rotary Screw Units
Base/tank mounted, open or cabinet enclosed
Diesel-driven construction portable & utility
Standard packages or turnkey custom designs

Since 1962, Universal Air & Gas Products Corporation (aka Universal Air Precipitator or UAPC) has manufactured a wide range of gas compressors to match virtually every compressor application. Our compressor products range in discharge pressure from vacuum to 6000 psig and accommodate air, inert gases, fuel gases and many process gases. Both ambient intake and booster compressors are available in both lubricated and non-lubricated, rotary and reciprocating designs. Electric, diesel, gas and hydraulic drives are applied as required with simple or comprehensive control features.

A Complete line of Compressors, Boosters and Air Systems, Aftercoolers, Dryers, Filters, ASME Tanks, Vacuum Pumps, Blowers, Lubricant, Parts & Repairs, High Pressure, Low Pressure, 0 to 1500 CFM, Compact, with Wheels, without Wheels, we can provide them for you.

Gas Compressors/Boosters
Oil-Free and Lubricated
1-500hp Rotary; 1-150hp Reciprocating
5 to 2600 scfm, up to 35000 psig.
Electric, Engine or Hydraulic Drive
All NEMA Classifications 1-12.
Air and water cooled designs

Products and Services include:
Lubricated and Oil Free Recipes for Air and Gas
Compressor/Boosters, 1 or 2 stage, vertical or horizontal
Bare blocks or turnkey custom packages
Dry and Oil Flooded Rotary Screw Units
Base/tank mounted, open or cabinet enclosed
Diesel-driven construction portable & utility
Standard packages or turnkey custom designs

Universal Air & Gas Products Corporation (UAPC) provides a comprehensive line of standard breathing air compressor system products or custom-built designs. The two principle classifications of breathing air products are Low Pressure and High Pressure Breathing Air Compressors.

UAPCs application engineers can assist you in determining the best system design for your application. Please email, fax or call in your application for discussion and recommendation. We can accommodate outdoor, low ambient, off-shore, marine or hazardous location design requirements when required.

Low Pressure Breathing Air Compressors

Low Pressure Breathing Air SystemsLow pressure systems provide OSHA, CGA and NFPA recognized, Grade-D or better quality breathing air at a pressure ranging from 60 to 200 PSIG. (PSIG means pounds per square inch measured on gauge, where the gauge reads zero at normal atmospheric pressure.) Fixed manifold systems and flexible hoses are used to carry the cleaned and purified compressed air to the breather(s).

Each breather must wear a Type-C breathing apparatus, which regulates the flow of compressed air through a mask, hood or suit. The amount of airflow per person, measured in SCFM (Standard Cubic Feet Per Minute) varies with the style and manufacturer of the Type-C delivery apparatus. Low pressure breathing air systems are typically employed in situations where the breather will require a continuous supply of air on a constant basis. The breather must be able to accommodate the limitations to movement that result from the compressed air feed line he is attached to.

Industrial applications for breathing air typically use low pressure supply for contaminated work station environments. Medical applications supply low pressure breathing air to patients. Low pressure breathing air is much less expensive to use and maintain, when compared with high pressure alternatives, per SCFM delivered

High Pressure Breathing Air Compressors

High Pressure Breathing Air SystemsHigh pressure breathing air compressors are used primarily for recharging storage banks of compressed breathing air. These storage banks are either ASME or DOT cylinders typically designed to hold 5,000 to 6,000 psig. From these storage vessels, various sizes and styles of SCBA or SCUBA tanks are recharged with Grade-E breathing air.

The high pressure storage of the compressed air allow the breather to have completely free mobility with only the burden of the high pressure storage tank on his back. These tanks have a limited time frame of usage between refills, typically less than 45 minutes.

A complete breathing air system will include the high pressure compressor system with associated controls and filtration devices, followed by a large capacity storage system and finally a containment fill station. The containment fill station is a system designed to safely hold and fill from storage cylinders the SCBA or SCUBA tank(s) to maximum pressure. A containment fill station is designed to safely contain an accidental explosion of an SCBA or SCUBA tank, should it rupture during refill.

Stationary SCBA and SCUBA Breathing Air Compressor Systems and Components

MAT-800 Series, Mobile Air Trailer

Universal Air & Gas Products Corporation (UAPC) has answered the call of the municipal fire market by supplying and servicing MAKO designed and manufactured products. Our product range includes breathing air compressor systems, air storage systems, and SCBA refilling stations to meet your arduous requirements. A world leader in breathing air technology, you can count on our time tested and performance proven systems to handle your most rigorous needs. For SCBA or SCUBA filling pressure up to 6000 psig, our robust products meet the challenges of the fire services industry.

Whether you are looking for a complete breathing air system or just a simple SCBA fill station you can feel comfortable that MAKO is ISO certified assuring you the quality and reliability that you deserve when you purchase a breathing air product. Product customization, turnkey installation, site training and ongoing maintenance services are all available through Universal Air Products. For Government customers, UAPC offers MAKO products through its BUY GSA site.

We at Universal Air & Gas Products Corporation is association with MAKO look forward to meeting your breathing air requirements with the systems described. Contact us for site review, product selection and pricing.

We specialize in building compressed air dryers customized for biogas, hydrogen, syngas, landfill, digester, and wastewater treatment applications. Our drying systems are designed to handle discharge pressures as high as 6000 PSIG. We build and integrate cartridge dryer/filtration manifolds for NGV refueling stations. These refrigerated air dryers are ideal for use in compressed air systems with internal air lines. Closed-loop air to water and salt water to fresh water heat exchangers is available too.

Specially formulated chemical drying agents are used in our desiccant compressed dryers for absorbing and holding moisture. UAPC filtration systems are available in flow capacities from 5 SCFM to 1030 SCFM. Particulate and coalescing air filters can be supplied with a range of accessories, including automatic drain valves, connector kits, wall mounting kits, and differential pressure indicators. Our air-cooled and water-cooled chillers are used in air coils, radiators, heat exchangers, nozzles, jacketed vessels, barrels, as well as mixers.

UAPC offers a variety of custom field services, including compressed air or gas system installation, maintenance, repair, overhaul or reconfiguration. Long term maintenance agreements are offered based upon single or multiple plant locations. In addition, piping system design and installation, certified welding service, air system audits, leak detection, gas monitoring devices and controls, custom fabrication services and turn-key conversion of your equipment from NEC NEMA 1, 4 or 12 to NEMA 7 hazardous environment code compliant are all available. Should you require backup equipment while your compressor system is down, we offer an extensive rental fleet for pressures ranging from 30 psig to 6,000 psig in both electric and diesel drive configurations. UAPC is a VA licensed, Class A mechanical contractor. Please consult with us for your skilled labor requirements.