Universal Air & Gas Products (aka Universal Air Products Corp.) - Residential Deluxe Precipitators - 4 Ton Through 5 Ton Units

Residential Deluxe Precipitators - Model Series: D4 (In-Duct, Integral Spray Wash) - 4 Ton through 5 Ton Units

D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.

Air Cleaner System Application

Unit of Measure

Items	D4-16H Residential Deluxe Precipitators - 4 Ton Unit	D4-16V Residential Deluxe Precipitators - 4 Ton Unit	D4-20H Residential Deluxe Precipitators - 5 Ton Unit	D4-20V Residential Deluxe Precipitators - 5 Ton Unit
Description	N/A Residential Deluxe Precipitators - Model Series: D4 (In-Duct, Integral Spray Wash) - 4 Ton through 5 Ton Units D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.
Air Flow	N/A Horizontal	N/A Vertical	N/A Horizontal	N/A Vertical
Air Flow Capacity	N/A 45.3 m³/min1600 ft³/min	N/A 45.3 m³/min1600 ft³/min	N/A 56.6 m³/min2000 ft³/min	N/A 56.6 m³/min2000 ft³/min
Rated Efficiency	N/A 90 %
Air Conditioner Capacity	N/A 4 tons	N/A 4 tons	N/A 5 tons	N/A 5 tons
Air Flow Resistance (wg)	N/A 0.1 in
W - Width	N/A 35 3/4 in	N/A 35 5/8 in	N/A 44 in	N/A 43 7/8 in
X - Duct Opening	N/A 32 5/8 in	N/A 32 11/16 in	N/A 40 7/8 in	N/A 40 15/16 in
Cell Removal Clearance	N/A 20 in	N/A 20 in	N/A 24 in	N/A 24 in
Legs and Cradle	N/A Optional	N/A Standard	N/A Optional	N/A Standard
Approximate Shipping Weight	N/A 120 lb	N/A 145 lb	N/A 150 lb	N/A 175 lb
Voltage	N/A 115 V230 V
Frequency	N/A 50 cycles60 cycles
Power (Per Pack)	N/A 40 W	N/A 40 W	N/A 45 W	N/A 45 W
Water Inlet	N/A 1/2 in	N/A 1/2 in	N/A 3/4 in	N/A 3/4 in
Drain Nipple	N/A 1 1/2 in
Hot Water at 125 Degree Fahrenheit (ºF) (30 Pounds per Square Gauge (PSIG) Pressure)	N/A 10 gpm	N/A 10 gpm	N/A 13 gpm	N/A 13 gpm
Additional Information	N/A The D-series uses our full size, full efficiency cell dimensions. The same dimensions are used for the commercial and industrial cell designs; however, the materials of construction and the number of structural support members used within the cell are different. In overview, the D-series cell uses eight tie rod supports for its collector plates; its ionizing section is supported with ceramic insulators; and its end plates are made of galvanized steel. Otherwise, the D-series cell has collector plates, spacers and an ionizing section that are identical with the materials and dimensions of the commercial and industrial cell designs described below.
Manufacturer	N/A Universal Air & Gas

Catalog