Universal Air & Gas Products (aka Universal Air Products Corp.) - C3-Commercial Standard Precipitators - 3 Ton Through 8 Ton Units

Commercial Standard Precipitators - Model Series: C3 (In-Duct, Integral Spray Wash) - 3 Ton Through 8 Ton Units

C-series: Commercial and industrial, in-duct designs use identical housing or cabinet structures made of galvanized steel to support the cells installed within them. The galvanized cabinet structure can be factory finished on its exterior in enamel at the customer's option. Seal welding of the cabinet is also available at its option. In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

Air Cleaner System Application

Unit of Measure

Items	C3-12H1 C3-Commercial Standard Precipitators - 3 Ton Unit	C3-16H1 C3-Commercial Standard Precipitators - 4 Ton Unit	C3-20H1 C3-Commercial Standard Precipitators - 5 Ton Unit	C3-24H1 C3-Commercial Standard Precipitators - 6 Ton Unit	C3-30H1 C3-Commercial Standard Precipitators - 7 1/2 Ton Unit
Description	N/A Commercial Standard Precipitators - Model Series: C3 (In-Duct, Integral Spray Wash) - 3 Ton Through 8 Ton Units C-series: Commercial and industrial, in-duct designs use identical housing or cabinet structures made of galvanized steel to support the cells installed within them. The galvanized cabinet structure can be factory finished on its exterior in enamel at the customer's option. Seal welding of the cabinet is also available at its option. In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.
Air Flow Capacity	N/A 34 m³/min1200 ft³/min	N/A 45.3 m³/min1600 ft³/min	N/A 56.6 m³/min2000 ft³/min	N/A 68 m³/min2400 ft³/min	N/A 85 m³/min3000 ft³/min
Rated Efficiency	N/A 90 %
Air Conditioner Capacity	N/A 3 tons	N/A 4 tons	N/A 5 tons	N/A 6 tons	N/A 7 1/2 tons
Air Flow Resistance (wg)	N/A 0.1 in
W - Width	N/A 29 9/16 in	N/A 36 3/16 in	N/A 44 7/16 in	N/A 51 5/16 in	N/A 65 3/4 in
X - Duct Opening	N/A 23 1/16 in	N/A 32 11/16 in	N/A 40 15/16 in	N/A 47 13/16 in	N/A 62 1/4 in
Y - Height	N/A 23 in
Z - Duct Height	N/A 15 7/8 in
Cell Removal Clearance	N/A 27 in	N/A 20 in	N/A 25 in	N/A 27 in	N/A 25 in
Approximate Shipping Weight	N/A 140 lb	N/A 175 lb	N/A 200 lb	N/A 225 lb	N/A 250 lb
Power Package Quantity	N/A 1
Voltage	N/A 115 V230 V	N/A 115 V	N/A 115 V	N/A 115 V	N/A 115 V
Frequency	N/A 50 Hz60 Hz
Power (Per Pack)	N/A 30 W	N/A 40 W	N/A 45 W	N/A 50 W	N/A 45 W
Water Inlet	N/A 3/4 in
Drain Flange (Iron Pipe Size (IPS))	N/A 2 in
Water Required at 40 Pound per Square Inch (PSI) Per Tier	N/A 11 gpm	N/A 14 gpm	N/A 20 gpm	N/A 22 gpm	N/A 29 gpm
Additional Information	N/A The C-series is just as efficient as the industrial or I-series, however it is not as mechanically sturdy. Due to its lower cost, some customers opt for the C-series over the I-series. In overview, the C-series cell uses eight tie rod supports for the collector plates; its ionizing section is supported without ceramic insulators; and its end plates are made of galvanized steel. Otherwise, the C-series cell has collector plates, spacers and an ionizing section that are identical with the materials and dimensions of the residential and industrial cell designs.
Note	N/A UAPC is committed to on-going improvement. Dimensions & specifications are subject to change without prior notification.
Manufacturer	N/A Universal Air & Gas

Catalog