Skip To Content

Catalog

Request Information
Why Do I Need an Oil-Water Separator?

The process of compressing air typically produces a substantial amount of condensate that contains air compressor lubricant carryover. Without an oil-water separator in your compressed air system, this condensate/lubricant mixture will go down the drain and quite possibly find its way into the surrounding groundwater. The Intelli PAK System has been engineered to provide the most effective and user-friendly oil-water separator on the market.
Unit of Measure

Specifications

Brands

 N/A Gardner Denver

Capacity

 N/A 1,000 ft³/min1,500 ft³/min250 ft³/min400 ft³/min750 ft³/min

Features

Features

 N/A
  • Alumino silicate substrate media is formulated to attract the contaminants and repel water molecules
  • The internal bonding process virtually eliminates any possibility of the used media being able to contaminate ground water
  • All Units will handle any lubricant including silicone
  • Sleek cabinet design that matches our compressors
  • Proprietary encryption design on the replacement cartridges

Benefits

Benefits

 N/A
  • Our cabinet design does not require the need for expensive pumps, sensors or filters
  • The proprietary media bed does such an effective job that no pre-filtration is required
  • Rugged internal piping assures proper operations over the life of the unit
  • Instead of opening the unit to replace spent media (a very messy process), simply dispose of the unit once it is full
  • This "fill and replace" method will ensure that both you and your compressor room do not end up covered in air compressor lubricant
  • Easy disposal most likely through local waste management service
See Our Partners See Our Partners
See Our Certification See Our Certification