Residential Deluxe Precipitators - Model Series: D4 (In-Duct, Integral Spray Wash) - 2 1/2 Ton through 3 Ton Units
D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.
D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.
Unit of Measure
Specifications
Air Flow |
N/A Horizontal |
Air Flow Capacity |
N/A 28.3 m³/min1000 ft³/min |
Rated Efficiency |
N/A 90 % |
Air Conditioner Capacity |
N/A 2 1/2 tons |
Air Flow Resistance (wg) |
N/A 0.1 in |
Frequency |
N/A 50 cycles60 cycles |
Cabinet Dimensions
W - Width |
N/A 22 11/16 in |
X - Duct Opening |
N/A 19 5/8 in |
Cell Removal Clearance |
N/A 24 in |
Legs and Cradle |
N/A Optional |
Approximate Shipping Weight |
N/A 85 lb |
Water Wash System
Water Inlet |
N/A 1/2 in |
Drain Flange (Iron Pipe Size (IPS)) |
N/A 1 1/2 in |
Hot Water at 125 Degree Fahrenheit (ºF) (30 Pounds per Square Gauge (PSIG) Pressure) |
N/A 7 gpm |
Additional Information
Additional Information |
N/A The D-series uses our full size, full efficiency cell dimensions. The same dimensions are used for the commercial and industrial cell designs; however, the materials of construction and the number of structural support members used within the cell are different. In overview, the D-series cell uses eight tie rod supports for its collector plates; its ionizing section is supported with ceramic insulators; and its end plates are made of galvanized steel. Otherwise, the D-series cell has collector plates, spacers and an ionizing section that are identical with the materials and dimensions of the commercial and industrial cell designs described below. |
