Residential Slimline Precipitators - Model Series: S4 (In-Duct) 2 1/2 Ton through 4 Ton Units
D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel.
D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel.
Unit of Measure
Specifications
Air Flow |
N/A Horizontal |
Air Flow Capacity |
N/A 28.3 m³/min1000 ft³/min |
Rated Efficiency |
N/A 90 % |
Air Conditioner Capacity |
N/A 2 1/2 tons |
Air Flow Resistance (wg) |
N/A 0.1 in |
Frequency |
N/A 50 cycles60 cycles |
Cabinet Dimensions
W - Width |
N/A 22 3/8 in |
X - Duct Opening |
N/A 19 5/8 in |
Cell Removal Clearance |
N/A 24 in |
Legs and Cradle |
N/A Optional |
Approximate Shipping Weight |
N/A 65 lb |
Additional Information
Additional Information |
N/A The D-series uses our full size, full efficiency cell dimensions. The same dimensions are used for the commercial and industrial cell designs; however, the materials of construction and the number of structural support members used within the cell are different. In overview, the D-series cell uses eight tie rod supports for its collector plates; its ionizing section is supported with ceramic insulators; and its end plates are made of galvanized steel. Otherwise, the D-series cell has collector plates, spacers and an ionizing section that are identical with the materials and dimensions of the commercial and industrial cell designs described below. |
