Universal Air & Gas Products (aka Universal Air Products Corp.) - i3-Industrial Standard Precipitators - 24 Ton through 40 Ton Units

Industrial Standard Precipitators - Model Series: i3 (In-Duct, Integral Spray Wash) - 24 Ton through 40 Ton Units

I-series: Like the Commercial (C-series), the industrial, in-duct designs use housing or cabinet structures to support the cells installed within them. The galvanized cabinet structure can be factory finished on it exterior in enamel at the customers option. Seal welding of the cabinet is also available at option and required for UL710 ductwork installations. Again, In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.

C3-Commercial and I3-Industrial Standard Precipitators 3 Through 40 Ton Units (C3H1P)

C3-Commercial and I3-Industrial Standard Precipitators - 3 Ton Through 40 Ton Units -2 (c3)

Unit of Measure

Items	i3-96H4-24 I3-Industrial Standard Precipitators - 24 Ton Unit	i3-108H3-24 I3-Industrial Standard Precipitators - 27 Ton Unit	i3-120H3 I3-Industrial Standard Precipitators - 30 Ton Unit	i3-120H4 I3-Industrial Standard Precipitators - 30 Ton Unit	i3-144H4 I3-Industrial Standard Precipitators - 36 Ton Unit
Description	N/A Industrial Standard Precipitators - Model Series: i3 (In-Duct, Integral Spray Wash) - 24 Ton through 40 Ton Units I-series: Like the Commercial (C-series), the industrial, in-duct designs use housing or cabinet structures to support the cells installed within them. The galvanized cabinet structure can be factory finished on it exterior in enamel at the customers option. Seal welding of the cabinet is also available at option and required for UL710 ductwork installations. Again, In-duct design means that the precipitator is supplied without an air handler and will be cut into a section of horizontal flow ductwork. Commercial cell designs are typically applied to applications where frequent and aggressive cleaning of the cells will not be required.
Air Flow Capacity	N/A 271.8 m³/min9600 ft³/min	N/A 305.8 m³/min10800 ft³/min	N/A 339.8 m³/min12000 ft³/min	N/A 339.8 m³/min12000 ft³/min	N/A 407.8 m³/min14400 ft³/min
Rated Efficiency	N/A 90 %
Air Conditioner Capacity	N/A 24 tons	N/A 27 tons	N/A 30 tons	N/A 30 tons	N/A 36 tons
Air Flow Resistance (wg)	N/A 0.1 in
W - Width	N/A 51 5/16 in	N/A 76 1/16 in	N/A 87 in	N/A 65 3/4 in	N/A 76 1/16 in
X - Duct Opening	N/A 47 13/16 in	N/A 72 9/16 in	N/A 83 5/8 in	N/A 62 1/4 in	N/A 72 9/16 in
Y - Height	N/A 78 1/2 in	N/A 60 in	N/A 60 in	N/A 78 1/2 in	N/A 78 1/2 in
Z - Duct Height	N/A 71 3/8 in	N/A 52 7/8 in	N/A 52 7/8 in	N/A 71 3/8 in	N/A 71 3/8 in
Cell Removal Clearance	N/A 27 in	N/A 27 in	N/A 25 in	N/A 25 in	N/A 27 in
Approximate Shipping Weight	N/A 735 lb	N/A 805 lb	N/A 875 lb	N/A 810 lb	N/A 1055 lb
Power Package Quantity	N/A 4	N/A 3	N/A 3	N/A 4	N/A 4
Voltage	N/A 115 V
Frequency	N/A 60 Hz
Power (Per Pack)	N/A 50 W	N/A 95 W	N/A 95 W	N/A 45 W	N/A 95 W
Water Inlet	N/A 3/4 in	N/A 3/4 in	N/A 1 in	N/A 3/4 in	N/A 3/4 in
Drain Flange (Iron Pipe Size (IPS))	N/A 2 in
Water Required at 40 Pound per Square Inch (PSI) Per Tier	N/A 22 gpm	N/A 33 gpm	N/A 39 gpm	N/A 29 gpm	N/A 33 gpm
Additional Information	N/A The I-series has the same efficiency as the commercial or C-series, however it is sturdier. Due to its higher cost, some customers opt for the C-series over the I-series. In overview, the I-series cell uses twelve tie rod supports for the collector plates; its ionizing section is supported without ceramic insulators; and its end plates are made of heavy gauge aluminum. Otherwise, the I-series cell has collector plates, spacers and an ionizing section that are identical with the materials and dimensions of the residential and industrial cell designs.
Note	N/A UAPC is committed to on-going improvement. Dimensions & specifications are subject to change without prior notification.
Manufacturer	N/A Universal Air & Gas