Universal Air & Gas Products Corporation
Universal Air & Gas Products Corporation
1140 Kingwood Avenue
Norfolk, VA, USA 23502
Phone: 757-461-0077
Fax: 757-461-0808
Email: info@uapc.com
Website: www.uapc.com
Print Back
We specialize in building compressed air dryers customized for biogas, hydrogen, syngas, landfill, digester, and wastewater treatment applications. Our drying systems are designed to handle discharge pressures as high as 6000 PSIG. We build and integrate cartridge dryer/filtration manifolds for NGV refueling stations. These refrigerated air dryers are ideal for use in compressed air systems with internal air lines. Closed-loop air to water and salt water to fresh water heat exchangers is available too.

Specially formulated chemical drying agents are used in our desiccant compressed dryers for absorbing and holding moisture. UAPC filtration systems are available in flow capacities from 5 SCFM to 1030 SCFM. Particulate and coalescing air filters can be supplied with a range of accessories, including automatic drain valves, connector kits, wall mounting kits, and differential pressure indicators. Our air-cooled and water-cooled chillers are used in air coils, radiators, heat exchangers, nozzles, jacketed vessels, barrels, as well as mixers.
Unit of Measure

Specifications

Compressor Types

 N/A Duplex (Multiple Compressors) Reciprocating Rotary Rotary Vane

Lubrication Options

 N/A Oil Lubricated Oil-Free Oil-Less

Installation Site

N/A Hazardous (Explosive gas or dust potentially present) Inside Inside-Water Exposed Outside Outside-Salt Air Exposed Outside-Weather Exposed

Types of Media

 N/A Biogas Digester Hydrogen Landfill Other Low Pressure Fuel Gas Applications Syngas Wastewater

Drive Type

 N/A Electric Engine Gas Hydraulic

Electrical Standards

 N/A Canadian Standards Association (CSA) International Electrotechnical Commission (IEC) International Protection Rating (IP) National Electrical Manufacturers Association (NEMA)

Electric Motor Standards

 N/A International Electrotechnical Commission (IEC) National Electrical Manufacturers Association (NEMA)

Electric Motor Options

 N/A Direct Coupled Explosion Proof Flexible V-Belt Drive Fungus Protection Mill & Chemical Duty Open Drip Proof (ODP) Space Heater Totally Enclosed Fan Cooled (TEFC)

Pressure Vessel Standards

 N/A American Society of Mechanical Engineers (ASME) California Seismic Zone California-LA Code Massachusetts code Others TUV

Pressure Vessel Materials

 N/A Carbon Steel, Enamel Exterior Finish only Carbon Steel, Epoxy-Coated Interior/Exterior Carbon Steel, Epoxy-Lined Interior Others Stainless Steel, 304 Stainless Steel, 316

Pressure Dew Point (Refrigerated Dryer)

 N/A 3 to 10 ºC

Manufacturer

 N/A Universal Air & Gas

Compressed Air/Gas Filters

Compressed Air/Gas Filter Capacity

 N/A 5 to 1030 scfm

Maximum Operating Temperature

 N/A 80 ºC

Maximum Operating Pressure

 N/A 16 barg

Features

 N/A Aluminum Body Condensate Level Indicator Differential Pressure Indicator Filter Elements Internal Automatic Drain Manual Drain

Compressed Air/Gas Filter Applications

 N/A Air Cylinders Blow Molding Dust Collectors Pneumatic Hand Tools Pre-filter for Refrigerated and Regenerative Dryers

Compressed Air/Gas Drying Systems

Gas Dryer Options

 N/A Desiccant dryer Membrane dryer Others Refrigerated dryer

Desiccant Dryer Types

 N/A Heated Heatless

Adsorbent Desiccants

 N/A Activated Alumina Molecular Sieve Silica Gel

Compressed Air/Gas Drying System Applications

 N/A Compressed Air Systems with Internal Air Lines Plant Air System Protection Stationary Abrasive Blasting

Process Water Chillers

Cooling Options

 N/A Air Cooled Aftercooler Air Cooled Compressor Block Air Cooled Entirely Air Cooled Intercooler (If Multi-Staged) Water Cooled Aftercooler Water Cooled Compressor Block Water Cooled Entirely Water Cooled Intercooler (If Multi-Staged)

Process Water Chiller Capacity

 N/A 0.25 to 30 tons

Compressor Type

 N/A Hermetic Scroll

Coolant Pump

 N/A 1/4 to 5 hp

Process Water Chiller Applications

 N/A Air Coils Heat Exchangers Jacketed Vessels Mixers Nozzles Radiators Troughs and Tanks

Additional Information

Services

 N/A Design Installation Maintenance Manufacturing Repair Testing and Certification

Industries Served

 N/A Fire Services General Industrial and Commercial Customers Marine Medical Military Offshore

Certifications

 N/A American Society of Mechanical Engineers (ASME) Department of Telecommunications (DOT) Certified