Air Flow |
N/A Vertical |
Air Flow Capacity |
N/A 34 m³/min1200 ft³/min |
Rated Efficiency |
N/A 90 % |
Air Conditioner Capacity |
N/A 3 tons |
Air Flow Resistance (wg) |
N/A 0.1 in |
Frequency |
N/A 50 cycles60 cycles |
W - Width |
N/A 26 in |
X - Duct Opening |
N/A 23 1/16 in |
Cell Removal Clearance |
N/A 27 in |
Legs and Cradle |
N/A Standard |
Approximate Shipping Weight |
N/A 115 lb |
Water Inlet |
N/A 1/2 in |
Drain Flange (Iron Pipe Size (IPS)) |
N/A 1 in |
Hot Water at 125 Degree Fahrenheit (ºF) (30 Pounds per Square Gauge (PSIG) Pressure) |
N/A 8 gpm |
Additional Information |
N/A The D-series uses our full size, full efficiency cell dimensions. The same dimensions are used for the commercial and industrial cell designs; however, the materials of construction and the number of structural support members used within the cell are different. In overview, the D-series cell uses eight tie rod supports for its collector plates; its ionizing section is supported with ceramic insulators; and its end plates are made of galvanized steel. Otherwise, the D-series cell has collector plates, spacers and an ionizing section that are identical with the materials and dimensions of the commercial and industrial cell designs described below. |
