Universal Air & Gas Products Corporation (UAPC) has decades of successful experience in turn-key, alternate fuels system design and construction. Gas compression, storage, dispensing, regulation and controls are all available from UAPC. Similar expertise is applied to government, military and industry applications. These applications include process, inert and synthetic gas systems; breathing, medical and sterile air applications built to virtually any USA or international standard.
Some of the services that are provided for the production of digester, landfill, biogas, hydrogen and syngas systems are:
Some of the services that are provided for the production of digester, landfill, biogas, hydrogen and syngas systems are:
- Consulting
- System design/engineering services
- In house CAD design capabilities
- Standard and custom designed compression skid packages
- Gas treatment systems
- Construction management
Unit of Measure
Specifications
Compressor Types |
N/A Duplex (Multiple Compressors) Reciprocating Rotary Rotary Vane |
Lubrication Options |
N/A Oil Lubricated Oil-Free Oil-Less |
Cooling Options |
N/A Air Cooled Aftercooler Air Cooled Compressor Block Air Cooled Entirely Air Cooled Intercooler (If Multi-Staged) Water Cooled Aftercooler Water Cooled Compressor Block Water Cooled Entirely Water Cooled Intercooler (If Multi-Staged) |
Installation Site |
N/A Hazardous (Explosive gas or dust potentially present) Inside Inside-Water Exposed Outside Outside-Salt Air Exposed Outside-Weather Exposed |
Types of Media |
N/A Biogas Digester Hydrogen Landfill Other Low Pressure Fuel Gas Applications Syngas Wastewater |
Drive Type |
N/A Electric Engine Gas Hydraulic |
Electrical Standards |
N/A Canadian Standards Association (CSA) International Electrotechnical Commission (IEC) International Protection Rating (IP) National Electrical Manufacturers Association (NEMA) |
Electric Motor Standards |
N/A International Electrotechnical Commission (IEC) National Electrical Manufacturers Association (NEMA) |
Electric Motor Options |
N/A Direct Coupled Explosion Proof Flexible V-Belt Drive Fungus Protection Mill & Chemical Duty Open Drip Proof (ODP) Space Heater Totally Enclosed Fan Cooled (TEFC) |
Gas Dryer Options |
N/A Desiccant dryer Membrane dryer Others Refrigerated dryer |
Pressure Vessel Standards |
N/A American Society of Mechanical Engineers (ASME) California Seismic Zone California-LA Code Massachusetts code Others TUV |
Pressure Vessel Materials |
N/A Carbon Steel, Enamel Exterior Finish only Carbon Steel, Epoxy-Coated Interior/Exterior Carbon Steel, Epoxy-Lined Interior Others Stainless Steel, 304 Stainless Steel, 316 |
Manufacturer |
N/A Universal Air & Gas |
Standard Compression Systems
Standard Compression System Models |
N/A Duplex, Enclosed Compressor Systems Enclosed Compressor Systems Large Compressor System (Air Cooled) Large Compressor Systems (Water Cooled) Small Compressor Systems |
Power (Electric Motor) Range |
N/A 5 to 300 hp |
Inlet Pressure |
N/A 1 inch WC or higher |
Maximum Discharge Pressure |
N/A 6000 psig |
Flow (Subject to Inlet/Outlet Conditions) Rate |
N/A 5 to 1030 scfm |
Compression Stages |
N/A 3 to 5, Subject to Inlet Conditions |
Cooling System Design Options |
N/A Air Water |
Electrical Classification (USA) |
N/A NEC NEMA Design 7, Class 1, Division 2, Group C, D |
Electrical Voltage |
N/A 200 to 575 V |
Electrical Phase (Ph) |
N/A 1 Ph to 10 HP 3 Ph all HP |
Standard Compression System Features |
N/A
|
Compression System Options |
N/A
|
