Universal Air & Gas Products Corporation
Universal Air & Gas Products Corporation
1140 Kingwood Avenue
Norfolk, VA, USA 23502
Phone: 757-461-0077
Fax: 757-461-0808
Email: info@uapc.com
Website: www.uapc.com
Print Back
Residential Deluxe Precipitators - Model Series: D4 (In-Duct, Integral Spray Wash) - 2 1/2 Ton through 3 Ton Units

D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.
Residential Deluxe Precipitators - 2 1/2 Ton Through 3 Ton Units (Horizontal)
Residential Deluxe Precipitators - 2 1/2 Ton Through 3 Ton Units - 2
Unit of Measure
Items Residential Deluxe Precipitators - 2 1/2 Ton Through 3 Ton Units (Horizontal)
D4-10H
Residential Deluxe Precipitators - 2 1/2 Ton Unit 		Residential Deluxe Precipitators - 4 Ton Through 5 Ton Units
D4-10V
Residential Deluxe Precipitators - 2 1/2 Ton Unit 		Residential Deluxe Precipitators - 2 1/2 Ton Through 3 Ton Units (Horizontal)
D4-12H
Residential Deluxe Precipitators - 3 Ton Unit 		Residential Deluxe Precipitators - 4 Ton Through 5 Ton Units
D4-12V
Residential Deluxe Precipitators - 3 Ton Unit
Description N/A Residential Deluxe Precipitators - Model Series: D4 (In-Duct, Integral Spray Wash) - 2 1/2 Ton through 3 Ton Units

D-series: Residential applications require an option for top-in, side-out airflow; or simple horizontal airflow. The D-series cabinet design accommodates this variable with two separate cabinet designs. Cabinets are made of cold rolled steel factory primed and finished in enamel. Optional stainless steel housings are available.
Air Flow N/A Horizontal N/A Vertical N/A Horizontal N/A Vertical
Air Flow Capacity N/A 28.3 m³/min1000 ft³/min N/A 28.3 m³/min1000 ft³/min N/A 34 m³/min1200 ft³/min N/A 34 m³/min1200 ft³/min
Rated Efficiency N/A 90 %
Air Conditioner Capacity N/A 2 1/2 tons N/A 2 1/2 tons N/A 3 tons N/A 3 tons
Air Flow Resistance (wg) N/A 0.1 in
W - Width N/A 22 11/16 in N/A 22 9/16 in N/A 26 1/8 in N/A 26 in
X - Duct Opening N/A 19 5/8 in N/A 19 5/8 in N/A 23 1/16 in N/A 23 1/16 in
Cell Removal Clearance N/A 24 in N/A 24 in N/A 27 in N/A 27 in
Legs and Cradle N/A Optional N/A Standard N/A Optional N/A Standard
Approximate Shipping Weight N/A 85 lb N/A 105 lb N/A 95 lb N/A 115 lb
Voltage N/A 115 V230 V
Frequency N/A 50 cycles60 cycles
Power (Per Pack) N/A 28 W N/A 28 W N/A 30 W N/A 30 W
Water Inlet N/A 1/2 in
Drain Nipple N/A 1 1/2 in N/A 1 in N/A 1/2 in N/A 1 in
Hot Water at 125 Degree Fahrenheit (ºF) (30 Pounds per Square Gauge (PSIG) Pressure) N/A 7 gpm N/A 7 gpm N/A 8 gpm N/A 8 gpm
Additional Information N/A The D-series uses our full size, full efficiency cell dimensions. The same dimensions are used for the commercial and industrial cell designs; however, the materials of construction and the number of structural support members used within the cell are different. In overview, the D-series cell uses eight tie rod supports for its collector plates; its ionizing section is supported with ceramic insulators; and its end plates are made of galvanized steel. Otherwise, the D-series cell has collector plates, spacers and an ionizing section that are identical with the materials and dimensions of the commercial and industrial cell designs described below.
Manufacturer N/A Universal Air & Gas